Looking for help to solve a puzzle on the rear footrests. I was looking to order some new footrest rubber bushes, but the ZPower website and the Haynes manual show a different rear footrest arrangement that the ones on my bike.
I’ve attached a couple of photos that show how my rear footrests are mounted. Are they wrong for a 1977 Z1000A1. And if so, can anybody help me understand what is going on?
I’m aware that the brackets have been cut and welded for some reason, but the Haynes manual shows the rear foot rests bolted directly to a tubular frame section. Mine has a “flat” plate carrying the footrests.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Rear Footrests
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Re: Rear Footrests
That is the Z650 set up that someone has done
Re: Rear Footrests
They are correct but someone has sawn off the original mounting that was circular & threaded to 10mm & have just welded a piece of flat steel in its place
Re: Rear Footrests
z2.john wrote:That is the Z650 set up that someone has done
My error. Of course it is also for Z1000 as well as Z650
Re: Rear Footrests
The footrests are correct, someone has added or welded a metal bracket on. Same for Z650
adrianhorsfield@live.co.uk
Sunny Bournemouth. Dorset. UK.
Sunny Bournemouth. Dorset. UK.
-
warren3200gt
- Hardcore
- Posts: 3098
- Joined: 13th Jun 2014
- Location: Dartford Kent
Re: Rear Footrests
Correct. Looks like yours had rotted out at the bottom half and po has sourced good ones and chopped off the rotted part and welded on good half. Shame they didn't take the time to get them straight and clean the weld up.
Pic from khi workshop manual.
- s-l1600 (8)-1.jpg (142.11 KiB) Viewed 3058 times
Pic from khi workshop manual.
PUM 488 June 2026
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
Re: Rear Footrests
warren3200gt wrote:Correct. Looks like yours had rotted out at the bottom half and po has sourced good ones and chopped off the rotted part and welded on good half. Shame they didn't take the time to get them straight and clean the weld up.
s-l1600 (8)-1.jpg
Pic from khi workshop manual.
Screenshot_20230610_094148_Samsung Notes.jpg
Thanks for the pic and the feedback Warren. Apologies for the delayed reply, but I’m still not getting notifications on replies to my posts.
Cheers
Graham
Graham
-
warren3200gt
- Hardcore
- Posts: 3098
- Joined: 13th Jun 2014
- Location: Dartford Kent
Re: Rear Footrests
z2.john wrote:That is the Z650 set up that someone has done
Similar to Z650 but mounted totally different position and angle on a Z650.
- 1 (1) (2).jpg (110.66 KiB) Viewed 2946 times
PUM 488 June 2026
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
Who is online
Users browsing this forum: Jigginjim and 63 guests