Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
650b2 carb issue
Moderators: chrisu, paul doran, Taffus, KeithZ1R
650b2 carb issue
Hi guys, I have an annoying stutter from closed throttle to opening it up, soon goes but annoying, carbs stripped and blown through, and cleaned, notch 3 on needles, all stock jets and air box, only thing not stock is the patten silencers, could it be I need to change the pilots? Tia.
CB125 GT380 CB750F1 Z1R GPZ 750 Turbo Z1R
Re: 650b2 carb issue
DavidZ1R wrote: notch 3 on needles Tia.
The needle position is wrong .
On the 650 it should to be 4th from the top so it needs lifting a notch.
Also have you had your choke plunger seats done ?
Re: 650b2 carb issue
zed1015 wrote:DavidZ1R wrote: notch 3 on needles Tia.
The needle position is wrong .
On the 650 it should to be 4th from the top so it needs lifting a notch.
Also have you had your choke plunger seats done ?
Yes you did the plungers, I thought the manual said 3rd notch, will double check, cheers
CB125 GT380 CB750F1 Z1R GPZ 750 Turbo Z1R
Re: 650b2 carb issue
similar prob for me earlier this summer cured by replacing the advancer unit springs - they had stretched and so when you opened the throttle a bit, it went to full advance straightaway.
gray
Re: 650b2 carb issue
Yes the ignition was next up for me, I replaced the carb boots yesterday just in case, just the same, that's easier than taking the bloody carbs off again.
CB125 GT380 CB750F1 Z1R GPZ 750 Turbo Z1R
Who is online
Users browsing this forum: No registered users and 67 guests
