Hello All,
I wondered if someone might be able to recommend a company that could carry out a repair to a crankcase.
The area is around one of the gearbox bushes. The semi-circular cut out for the bush and flange areas either side need a thin layer of weld applied then to be be machined back to original form/dimensions.
I can get the TIG welding done but its the machining that I'm not sure about.
Thanks in advance - Sean
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Crankcase repair
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Re: Crankcase repair
If it helps, John Browse has crankcase sets for around £450.
I also have a good friend who has a complete bottom end for a 73 Z1.
I also have a good friend who has a complete bottom end for a 73 Z1.
Kawasaki Z1-R TC Turbo, Kawasak GPz750 Turbo, Kawasaki KZ650B3, Kawasaki ZRX1100R, H**** VF500F2F, Norton Commando 961SP, Suzuki VS800
-
Bill Newman
- Custard Cream
- Posts: 544
- Joined: 27th May 2007
- Location: Ipswich
Re: Crankcase repair
Try Patrick at Seager Engineering.
http://www.seager-engineering.com/
Excellent work on the type of repairs you are after and not too far away from you. Have a look at his FB page - he is always posting pictures of his work. He did the head on my J and it was very good.
http://www.seager-engineering.com/
Excellent work on the type of repairs you are after and not too far away from you. Have a look at his FB page - he is always posting pictures of his work. He did the head on my J and it was very good.
Who is online
Users browsing this forum: No registered users and 103 guests