Only the 2* (7.3t) available from CMSNL ( expensive once you add freight) and have also tried Z-Power, but can't locate.
A used one will do if anyone has some gathering dust
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Generator/Starter gear dampers
Moderators: chrisu, paul doran, Taffus, KeithZ1R
-
Zomerset Zed
- 100Club
- Posts: 239
- Joined: 30th May 2014
- Location: Somerset
Generator/Starter gear dampers
Anyone know where i can buy the damper washers (3 different thicknesses available) that fit between the starter ring gear on the crankshaft and the bearing on the end of the crank?
Only the 2* (7.3t) available from CMSNL ( expensive once you add freight) and have also tried Z-Power, but can't locate.
A used one will do if anyone has some gathering dust
Only the 2* (7.3t) available from CMSNL ( expensive once you add freight) and have also tried Z-Power, but can't locate.
A used one will do if anyone has some gathering dust
Who is online
Users browsing this forum: No registered users and 45 guests