Should I just put it back together still minus the one,?
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Carbs
Moderators: chrisu, paul doran, Taffus, KeithZ1R
-
Stogmuller
- Regular Poster
- Posts: 57
- Joined: 22nd Jan 2019
- Location: Liverpool
Carbs
Hi, I took the float bowls off my 82 z1000 ,CV carbs and sandwiched between float bowl and body are small rubber/neoprene discs ,,no holes in em and they sit in circular casting on top body and on gasket on float bowl,,,one of them is missing, so I wondered if it was necessary,? There are no drilling’s leading to them ,,!
Should I just put it back together still minus the one,?
Should I just put it back together still minus the one,?
-
warren3200gt
- Hardcore
- Posts: 3102
- Joined: 13th Jun 2014
- Location: Dartford Kent
Re: Carbs
CV diaphrams availble here http://nrp-carbs.co.uk
PUM 488 June 2026
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
Re: Carbs
I had some in and some not. Never found what they were for and it ran perfectly without them. Mine (the three that were there) were flat 'O rings that had been made flat,.. not compressed that way.
AL
AL
1981 J1
Who is online
Users browsing this forum: No registered users and 67 guests