colinj wrote:hillbilly wrote:got to check it yet,but a bike shop near me is supposed to have a set of engine cases with no numbers on.for a z .brand new in box.
Hillbilly, have you heard any news on these yet? (sorry to pester!
)
Colinj
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Colinj's Z1A1 rebuild
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Z1000A1 re-build
Just acquired the GSX1400 swingarm, couldn't resist! 
Jerry on Z1OC Stand today
Great to meet you today at Uttoxeter, thanks for the advice! Look forward to your help through my build, cheers for the encouragement!
Got my Original Cases Back!
Awesome, my old cases retrieved from a friend who had kept them for the last ten years true to his word! Now I just need a shot blaster!!!! 
-
Ginger Bear
- Hardcore
- Posts: 5512
- Joined: 16th Dec 2008
- Location: In the Dark.
- Contact:
Z1000A1 re build
Ginger Bear, it is a great break, virtually everything now, shame the tank, panels and tailpiece were nicked but there you go, the rest is there. I am at a loss as to how the front end should look tho' I like the GSX1400 rear end but am not so sure about the front, I like the look of the "upside down" fork sets, will have to see what comes up nearer the time! 
-
Ginger Bear
- Hardcore
- Posts: 5512
- Joined: 16th Dec 2008
- Location: In the Dark.
- Contact:
Colin,
Tread carefully with upside down forks, they're usually quite short, which will cause all sorts of problems..... You can read all about mine in my 'Z1000 Money Muncher' thread.
I was reliably informed by Zed1015 that ZX9R(B) forks are the longest Kawasaki made. I have also believe early GSXR1100 forks are long enough as well.
Do a bit of research first...... It will save you £££££££'s in the long run.
Good Luck.
Tread carefully with upside down forks, they're usually quite short, which will cause all sorts of problems..... You can read all about mine in my 'Z1000 Money Muncher' thread.
I was reliably informed by Zed1015 that ZX9R(B) forks are the longest Kawasaki made. I have also believe early GSXR1100 forks are long enough as well.
Do a bit of research first...... It will save you £££££££'s in the long run.
Good Luck.
Upside down forks
Ginger Bear, thanks for the advice, I will have another look at your moneymuncher thread way before I invest and the ZX9R and GSXR info is invaluable, I don't have a pot to spend so I will have to be very careful where it goes, but the good side is there is no time limit so I can take my time researching! Thanks again!!! 
-
Ginger Bear
- Hardcore
- Posts: 5512
- Joined: 16th Dec 2008
- Location: In the Dark.
- Contact:
Is this What I think it is?
So here are some photos you did not expect yet! Anyone give me a difinitive on what this is off please? I believe (fingers crossed) it is from a thou but it may just be a 900?
Who is online
Users browsing this forum: No registered users and 61 guests