Page 1 of 1
Governor-breaker advance/retard is this wrong?
Posted: Fri Jan 05, 2024 8:40 pm
Author: thewormman
I have a KZ900 I'm trying to get going. It had a Dyna electronic ignition on it that was knackered so I am putting it back to points. Ive got the plate, points, condensers but the advance /retard plate doesn't look its original.
Could you knowledgable people have a look and tell me if its wrong and if so how I can get a replacement?
Thanks
Re: Governor-breaker advance/retard is this wrong?
Posted: Fri Jan 05, 2024 9:15 pm
Author: zed1015
That is the correct 005 20/40 degree advancer for all Z900, Z1000 up to the Z1R D1 .
The rotor needs swapping for a cam though if you want to run points.
Re: Governor-breaker advance/retard is this wrong?
Posted: Fri Jan 05, 2024 9:43 pm
Author: thewormman
zed1015 wrote:That is the correct 005 20/40 degree advancer for all Z900, Z1000 up to the Z1R D1 .
The rotor needs swapping for a cam though if you want to run points.
Thanks, is it possible to get the rotor separately, do you know who would sell them, thanks very much for your help
Re: Governor-breaker advance/retard is this wrong?
Posted: Fri Jan 05, 2024 11:01 pm
Author: zed1015
I'd put an ad in the wanted section.
There's ton's of people who have fitted Dyna ignitions so there's bound to be a few points cams going spare..
Re: Governor-breaker advance/retard is this wrong?
Posted: Sun Jan 21, 2024 7:51 pm
Author: gray
John Browse is worth a try
Re: Governor-breaker advance/retard is this wrong?
Posted: Mon Jan 22, 2024 1:53 pm
Author: KeithZ1R
Have you found one yet
