Page 1 of 1
Original Finish on rear axle, swing arm ,engine mounts
Posted: Mon Sep 04, 2023 6:44 am
Author: shaggy
Hi another question for them that know what finish is correct and original for rear axle shaft nut and spacers.
Swing arm shaft nut and spacers.
Rear motor mount spacers.
Re: Original Finish on rear axle, swing arm ,engine mounts
Posted: Mon Sep 04, 2023 7:51 am
Author: zed1015
Zinc plated.
Re: Original Finish on rear axle, swing arm ,engine mounts
Posted: Mon Sep 04, 2023 3:44 pm
Author: Philippe
Hi
I think that the swing arm nut ( the big one that sits on the left hand side of the frame) was chromed...correct me if I'm wrong please.
GrtZ
Philippe
Re: Original Finish on rear axle, swing arm ,engine mounts
Posted: Tue Sep 05, 2023 11:44 am
Author: z1bman
Philippe wrote:Hi
I think that the swing arm nut ( the big one that sits on the left hand side of the frame) was chromed...correct me if I'm wrong please.
GrtZ
Philippe
No Philippe it was zinc plated
Re: Original Finish on rear axle, swing arm ,engine mounts
Posted: Tue Sep 05, 2023 12:54 pm
Author: Philippe
Hi Z1B man
thank you! Another lesson learned.
GrtZ
Philippe
Re: Original Finish on rear axle, swing arm ,engine mounts
Posted: Tue Sep 05, 2023 2:58 pm
Author: z2.john
As far as I'm aware, the nut is chrome. All other items asked about are clear zinc
Re: Original Finish on rear axle, swing arm ,engine mounts
Posted: Tue Sep 05, 2023 7:05 pm
Author: r3sc
I’m also with the nut being chrome and all other items BZP!
Re: Original Finish on rear axle, swing arm ,engine mounts
Posted: Tue Sep 05, 2023 8:19 pm
Author: Z1streetfighter71
Not that im a reliable source but the part is listed as 42045-018 but says nothing on the finish but i have 3.. 2 rusted zinc the other chromed.
Re: Original Finish on rear axle, swing arm ,engine mounts
Posted: Tue Sep 05, 2023 9:00 pm
Author: z2.john
That is the rear axle nut which correctly is Zinc. Swing arm nut is Chrome
Re: Original Finish on rear axle, swing arm ,engine mounts
Posted: Wed Sep 06, 2023 3:33 am
Author: Philippe
Hi z2.John
I'm glad you confirm my thoughts. All the Z bikes I have, have a chromed swing arm nut.
I was afraid that I was wrong all the time.
Only the Z1000H has a zinc plated swing arm nut.
GrtZ
Philippe
Re: Original Finish on rear axle, swing arm ,engine mounts
Posted: Wed Sep 06, 2023 7:26 am
Author: z2.john
item 8 below
Re: Original Finish on rear axle, swing arm ,engine mounts
Posted: Wed Sep 06, 2023 9:32 am
Author: Z1streetfighter71
z2.john wrote:That is the rear axle nut which correctly is Zinc. Swing arm nut is Chrome
Take me to misread the brief
but on a side note the page you posted above is it from a book or an online pdf i can source? thanks
