Page 1 of 1
z1b correct wire routing help.
Posted: Tue Jul 18, 2023 9:16 am
Author: Z1streetfighter71
Does anyone have any pics or Pdf of the correct wire routing including holding tie locations for the Z1? I have the usual workshop manuals and it doesn't actually give real time specifics of the wiring harness routing, i would like to do this all original so any help would be appreciated.
Re: z1b correct wire routing help.
Posted: Tue Jul 18, 2023 9:22 am
Author: warren3200gt
Study the backgrounds of each picture in the workshop manual.
Check every publisher manual you can find for picture details.
Factory workshop, clymer, and even Haynes as they took apart new bikes for for the pictures.
Re: z1b correct wire routing help.
Posted: Tue Jul 18, 2023 10:11 am
Author: Z1streetfighter71
warren3200gt wrote:Study the backgrounds of each picture in the workshop manual.
Check every publisher manual you can find for picture details.
Factory workshop, clymer, and even Haynes as they took apart new bikes for for the pictures.
Have done mate and im fairly sure i have it down to about 70% to 80% but i thought there might be a few that had it at 100% before i put it to bed. Worst case ill pull it all out and start again when im told its wrong, thats life..