Page 1 of 1

GPz1100B1/2 1000J Load Decal.

Posted: Sat Jan 07, 2023 9:06 am
Author: BAFF1960
Hi.

Looking for a Load Decal that's stuck to the seat base for my GPz1100B2. Not sure of the part number but seen several ones for other Z1000's online.

Regards Alan.

Re: GPz1100B1/2 1000J Load Decal.

Posted: Sat Jan 07, 2023 2:00 pm
Author: Al
I have two 1000J (?) seat bases here with stickers on. One is an (original) 'load' sticker as you have shown, the other has a different sticker (original) and its the 'caution battery vent hose' routing one which is black printed on silver.
The first is similar but different to the Zpower one for z900 shown at the top of this set.
https://www.z-power.co.uk/decals-and-st ... -z900-1976
The second one is similar to the one pictured here;
https://www.z-power.co.uk/decals-and-st ... ecal-ks125
Do you know which is correct for the B2 as i believe both these seats are 1981 / 1982 and both are as they left the factory!!!

Number on the 'Load Data' sticker is 56037-1134
Number on the 'Battery Vent Hose' sticker is 56031-1159
https://www.kzrider.com/forum/5-chassis ... de-bracket


A year ago, i sent a high res. digital photo with sizes in mm for length and height to http://www.bike-stickers.com/homepage.htm and they printed me off about ten of a sticker that money couldn't buy. They wern't expensive.
AL

Re: GPz1100B1/2 1000J Load Decal.

Posted: Sat Jan 07, 2023 5:18 pm
Author: BAFF1960
Hi.

Any chance of a good pic of the original J load one ?

Regards Alan.

Re: GPz1100B1/2 1000J Load Decal.

Posted: Sat Jan 07, 2023 6:36 pm
Author: Al
'Load' sticker is a bit too damaged to be useful but someone will have something better hopefully.
I can take better pictures in daylight but somehow i dont know it will help.
Load.JPG

Its 105mm wide and 45mm high.

And in exactly the same place on the other seat.

vent.JPG


AL

Re: GPz1100B1/2 1000J Load Decal.

Posted: Sat Jan 07, 2023 10:24 pm
Author: BAFF1960
Hi.

Thanks for that info. Looking at my seat closely it only had the load decal I think. If I cant source one I might get some made. Would be much appreciated
if you could measure it. The font looks the same as others on the bike.

Regards Alan.

Re: GPz1100B1/2 1000J Load Decal.

Posted: Sun Jan 08, 2023 10:45 am
Author: compo z1r
BAFF1960 wrote:Hi.

Thanks for that info. Looking at my seat closely it only had the load decal I think. If I cant source one I might get some made. Would be much appreciated
if you could measure it. The font looks the same as others on the bike.

Regards Alan.


hutchy has them or will get them pm him or look on ebay his selling !!!