Z1OwnersClub GB

Hi guys, does anyone know of any company or individual that can re line a cam chain guide, as you can see a part has come off, can't find another , tia.

what bike is it from?

Z400b2, can't find a replacement anywhere

There's a few on Ebay usa..
Not cheap but - https://www.ebay.co.uk/itm/373930815036 ... 1&mkcid=28

this is from the z440 but the engine is the same

https://www.ebay.co.uk/itm/351583406199 ... ition=3000

zed1015 wrote:There's a few on Ebay usa..
Not cheap but - https://www.ebay.co.uk/itm/373930815036 ... 1&mkcid=28

Seen that one, right part number wrong part, that one is the left hand one in my pic, from the D model.

z1bman wrote:this is from the z440 but the engine is the same

https://www.ebay.co.uk/itm/351583406199 ... ition=3000

No good that one, checked it out, wrong mount, my guide only fits 4 or 5 models, and from what other forum posts say, it is not Un common problem. , thanks for looking .

this is supposed to be a 400b motor send them a message see if they will sell you the chain guide

https://www.ebay.co.uk/itm/312875431052 ... R5jW5KvCYA

z1bman wrote:this is supposed to be a 400b motor send them a message see if they will sell you the chain guide

https://www.ebay.co.uk/itm/312875431052 ... R5jW5KvCYA

Known DK they won't strip it, correct engine though. I can ask

DavidZ1R wrote:

z1bman wrote:this is supposed to be a 400b motor send them a message see if they will sell you the chain guide

https://www.ebay.co.uk/itm/312875431052 ... R5jW5KvCYA

Known DK they won't strip it, correct engine though. I can ask

its worth a phone call