Page 1 of 1
Fork tool
Posted: Wed Apr 13, 2022 6:00 pm
Author: DavidZ1R
Hi guys, the little tool that is available for removing the internals on a set of forks, from bikers tools I think, does it work on the z1000a, just the inside slide on the 650 has a round hole not a hex head. Before I start to change the pitted tubes. Thanks
Re: Fork tool
Posted: Wed Apr 13, 2022 8:39 pm
Author: ADRIAN H
Why don’t you give Ralph owner of bikers toolbox (SW area rep) a call. His number is inside the front cover of the year book.
Re: Fork tool
Posted: Thu Apr 14, 2022 10:38 am
Author: deka
if it is the same as the z900a4 ie oval then i have one
Re: Fork tool
Posted: Thu Apr 14, 2022 4:46 pm
Author: DavidZ1R
I have the little tool, I just wondered if the inners were the same as a z650, that is round hole or square top, soon find out
Re: Fork tool
Posted: Sun Dec 18, 2022 8:43 am
Author: PhilMill63
deka wrote:if it is the same as the z900a4 ie oval then i have one
Sorry to revive this old post but can you you tell me which tool I need for an A4, there are so many versions on the Website, long ones of varying sizes plus little tools that must need long socket extensions. I tried undoing the bottom allen socket with an impact driver but it just spins, the impact driver method had never let me down before.
Thanks, Phil