Skimming Z9 a4 cylinder heads
Posted: Wed Jan 30, 2019 5:20 pm
Just had cylinder head skimmed by 5 thou of an inch, will the valves hit the pistons, if so, how could I remedy it? Any advice helpful
Z1OwnersClub GB
Kawasaki's Air Coooled Big Fours
http://www.z1ownersclub.co.uk/phpBB3/
Skimming Z9 a4 cylinder heads
http://www.z1ownersclub.co.uk/phpBB3/viewtopic.php?f=4&t=44515
Page 1 of 1
Re: Skimming Z9 a4 cylinder heads
Posted: Wed Jan 30, 2019 5:33 pm
Edited. Having a senior moment.
Re: Skimming Z9 a4 cylinder heads
Posted: Wed Jan 30, 2019 6:05 pm
a 5 thou skim ( 0.0127mm ) is nothing.
Less than the variation in gasket thicknesses.
You have miles of clearance .
Less than the variation in gasket thicknesses.
You have miles of clearance .
Re: Skimming Z9 a4 cylinder heads
Posted: Thu Jan 31, 2019 7:20 am
Thanks ever so much