Kawasaki aren’t very helpful in this regard, I have a TDR book that tells you exactly where to route all the wires tubes and cables on the TDR, and exactly where the bands go
Even pics would be good... thanks in anticipation
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
ELR wiring loom
Moderators: chrisu, paul doran, Taffus, KeithZ1R
ELR wiring loom
On the 1000R parts diagram there are 2 big bands, 5 medium bands and two “rubber bands. The two big ones onbviously hold the loom onto the frame top spine tube under the tank, can anyone help pinpoint exactly where the rest go?
Kawasaki aren’t very helpful in this regard, I have a TDR book that tells you exactly where to route all the wires tubes and cables on the TDR, and exactly where the bands go
Even pics would be good... thanks in anticipation
Kawasaki aren’t very helpful in this regard, I have a TDR book that tells you exactly where to route all the wires tubes and cables on the TDR, and exactly where the bands go
Even pics would be good... thanks in anticipation
Who is online
Users browsing this forum: No registered users and 79 guests