Hello All!
My N04 connecting rod side clearance is 0.5mm (Z1000) The standard is 0.3 - 0.4 with a service limit of 0.6mm. All the others are within spec.
At 0.5mm should I be concerned and need to get it looked before it goes back in or is this normal?
Many thanks!
Paul
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z1000 Connecting Rod Big End Side Clearance
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Re: Z1000 Connecting Rod Big End Side Clearance
0.5mm is within service limits so use it..
Re: Z1000 Connecting Rod Big End Side Clearance
zed1015 wrote:0.5mm is within service limits so use it..
Thanks Rob, for the quick reply!
Who is online
Users browsing this forum: Google [Bot] and 67 guests