Am i completely wrong, or can i use gpz1100 camshaft in my MK2. Sprocket size 32 teeth?…if so is ther any benefit like higher lift duration etc etc.
I have an option for a pair much cheaper than webb, andrews etc
Any advice or help appreciated as usual.
Rob
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Gpz1100 camshafts
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Gpz1100 camshafts
paid up member
Re: Gpz1100 camshafts
Yes! You can use them.
You will need the APE 32t /2 bolt ACS1100K-2B adaptor sprockets .
I presume you are refering to the 83-85 unitrack cams with extra lift etc ( set them at 110 degrees ) and you may have to slightly clearance the head.
All the other GPZ100B and 1000J cams are pretty much the same spec as the stock 900/1000 so not worth the conversion.
You will need the APE 32t /2 bolt ACS1100K-2B adaptor sprockets .
I presume you are refering to the 83-85 unitrack cams with extra lift etc ( set them at 110 degrees ) and you may have to slightly clearance the head.
All the other GPZ100B and 1000J cams are pretty much the same spec as the stock 900/1000 so not worth the conversion.
Who is online
Users browsing this forum: No registered users and 58 guests