Page 1 of 2
Z650 Harris
Posted: Fri Jan 26, 2018 10:35 am
Author: needaz1100r
Hi Guys,
I'm involved in the restoration of a Z750E with a friend as a tribute to his brother who owned the bike and passed away last year.
We need a Harris exhaust, Hyde can't supply at the moment.
Z650 should be the same fitment, and more likely someone has one....
Any chance anyone does???
Thank you.
Re: Z650 Harris
Posted: Fri Jan 26, 2018 12:43 pm
Author: warren3200gt
Got a skanky old kerker you can have foc. Alternatively you can get a new delkevic full stainless system for not much more than a second hand harris (that's clean and useable)
Re: Z650 Harris
Posted: Fri Jan 26, 2018 1:58 pm
Author: Charlie
Hyde's are crap. They could not supply when I wanted one either. Their business model was that I paid up front in full, with no clue when the zorst would arrive...when/if they roped in enough suckers to do the same, they would do a production run.
Sounds a bit like the DAW setup in Germany ..... They are not worthy of our custom.
Re: Z650 Harris
Posted: Fri Jan 26, 2018 2:50 pm
Author: Taffus
I would speak to dave at exhaustcraft, he dies stainless for 650's
https://www.exhaustcraft.co.uk/
Re: Z650 Harris
Posted: Fri Jan 26, 2018 6:58 pm
Author: needaz1100r
Yeah, we wouldn't pay Hyde up front. The reason for wanting a Harris is because it had one when the brother used it.
Otherwise Delkevic it is!
Thanks for the input, I will keep this up in case anyone else signs in who may have one.
Re: Z650 Harris
Posted: Fri Jan 26, 2018 8:26 pm
Author: Julian_Boolean
There's a company that is on eBay that makes replicas of Harris cans
Re: Z650 Harris
Posted: Fri Jan 26, 2018 8:28 pm
Author: 8 Valve Mark
fair play to you mark. very honourable project mate. I'll keep my bargain hunting eyes peeled . mark
Re: Z650 Harris
Posted: Sat Jan 27, 2018 3:20 pm
Author: needaz1100r
Julian_Boolean wrote:There's a company that is on eBay that makes replicas of Harris cans
Found them, thank you for this, it looks like the best answer, coupled with delkevic downpipes.
Re: Z650 Harris
Posted: Sat Jan 27, 2018 3:47 pm
Author: Big Fluff
A friend of mine has just bought a Z650B3 which has a real mint Kerker on it.
However he want's a standard 4-2 setup.
Anyone know of any companies manufacturing a 4-2 system for the Z650 ?
If so he'll sell the Kerker.
Re: Z650 Harris
Posted: Sat Jan 27, 2018 4:15 pm
Author: needaz1100r
Big Fluff wrote:A friend of mine has just bought a Z650B3 which has a real mint Kerker on it.
However he want's a standard 4-2 setup.
Anyone know of any companies manufacturing a 4-2 system for the Z650 ?
If so he'll sell the Kerker.
http://www.osmc.co.uk/exhaust.htm
Re: Z650 Harris
Posted: Sat Jan 27, 2018 4:18 pm
Author: wheelysteve
The green Z650 on osmc is mine. The exhaust has been on it 8-9 years now. Good quality but they do tarnish at the exhaust ports as they are single skinned.
Not cheap though !!
Re: Z650 Harris
Posted: Sat Jan 27, 2018 4:38 pm
Author: wheelysteve
Re: Z650 Harris
Posted: Sat Jan 27, 2018 5:21 pm
Author: Big Fluff
Okay looks good thanks.
Re: Z650 Harris
Posted: Sat Jan 27, 2018 5:28 pm
Author: needaz1100r
Big Fluff wrote:Okay looks good thanks.
Depending on how brave he is....
https://www.ebay.co.uk/itm/Kawasaki-Z65 ... Swh1paA7Tm
Re: Z650 Harris
Posted: Sun Jan 28, 2018 8:52 pm
Author: KWACKERZ1
Apparently the guy flogging the harris replica cans takes the money up front and has failed to deliver onorders thathave been placed.
So if you fancy one just be careful!