Frame with V5 for 1000/900 What have you got?

KWACKERZ1 · #1 PostAuthor: **KWACKERZ1** » Fri Nov 02, 2012 7:46 pm

I am thinking of using up all my bits I have lying around to put another bike, together as a bit of a hack and perhaps for classic track days,all I need is a frame :roll:

.

Anybody got anything they want to part with.

Conditions not too important as I will probably brace it and remove unwanted brackets etc.
So anything pre-GPZ Would be good!

hillbilly · #2 PostAuthor: **hillbilly** » Fri Nov 02, 2012 8:05 pm

i have a early zed frame without numbers or v5,with a fireblade swingarm and wheel installed.

KWACKERZ1 · #3 PostAuthor: **KWACKERZ1** » Fri Nov 02, 2012 8:14 pm

Hillbilly,

I would Prefer something with a V5 but might be tempted, I'll see what comes up in the meantime could you pm/email me pics, and a price?
Ta
kwackerz1@dsl.pipex.com

hillbilly · #4 PostAuthor: **hillbilly** » Fri Nov 02, 2012 8:22 pm

i have two other frames one with a v5(a4).
and one that a club member give me that im building into a classic racer type thing.
v5s are maybe getting hard to find nowerdays.
wish you luck,going off the prices on this forum,and ebay,these zed bikes are rare.
might just start hording bits myself. :lol:

KWACKERZ1 · #5 PostAuthor: **KWACKERZ1** » Fri Nov 02, 2012 8:40 pm

If you change your mind and want to part with one, give me a shout!

Pigford · #6 PostAuthor: **Pigford** » Fri Nov 02, 2012 9:18 pm

I got a cheap Z650 "X" reg frame with V5 - seat rails been chopped around :?:

KWACKERZ1 · #7 PostAuthor: **KWACKERZ1** » Sat Nov 03, 2012 12:06 am

Thanks Piggy prefer a z1000/9 but its another option to consider ta.

jimmock · #8 PostAuthor: **jimmock** » Sat Nov 03, 2012 6:00 pm

I've got a '72 Raliegh Chopper frame.

PM me if it's of any use to you.

z1000puddin · #9 PostAuthor: **z1000puddin** » Sun Nov 04, 2012 10:43 am

I have a 1977/78 ltd frame.
No V5
Rear seat rails have been chopped, but everything else is there and no rust at all.

Can post a pic if you are interested.

Stu

LTD Project · #10 PostAuthor: **LTD Project** » Sun Nov 04, 2012 7:39 pm

I have a 79 LTD frame, clean and unsullied. It is from the US and has import papers but no V5.

Any good?

KWACKERZ1 · #11 PostAuthor: **KWACKERZ1** » Mon Nov 05, 2012 10:17 am

I've got a '72 Raliegh Chopper frame.

Sorry Jimmock if its your chopper it will probably be too small to be of use to anyone!!

KWACKERZ1 · #12 PostAuthor: **KWACKERZ1** » Mon Nov 05, 2012 10:20 am

LTD Project.

I have a 79 LTD frame, clean and unsullied. It is from the US and has import papers but no V5.

Any good?

Might be interested let me know via PM what you're after for it as it looks like registered ones for sale are few and far between.

harrythemagnum · #13 PostAuthor: **harrythemagnum** » Tue Nov 06, 2012 1:10 am

Under negotiations for an incomplete basket MkII, not seen it yet, if it comes, I'll dibs you on the frame then?

What's it worth? Genuine no idea, might help me with negotiations.

KWACKERZ1 · #14 PostAuthor: **KWACKERZ1** » Tue Nov 06, 2012 9:08 am

Harry,
Have pm'd you.

Let me know if your deal comes off.
Phil

neilbarrett · #15 PostAuthor: **neilbarrett** » Tue Nov 06, 2012 6:00 pm

Got a z1r or mk2 frame with book

Frame with V5 for 1000/900 What have you got?

Frame with V5 for 1000/900 What have you got?

Who is online